| Username: | Message: |
|---|
| gotcha! (636hp) | Yes, but you will need to install a bumper from a 550 or do custom work on your existing bumper to enlarge the exhaust opening..
|
| SDf10 (537hp) | It looks very clean
|
| newyear1 (914hp) | Quote: Originally posted by Sharbotcom I changed my tips to quads today. I ordered the double coat black chrome from cyba and just received the 550 diffuser. I had the work done at Gary's Automotive in Kanata based on a friend's suggestion. I've had a number of other good suggestions (thanks Bobblehead), but this one worked best for me in terms of convenience. John, the installer, was meticulous and everything went well. He cut about an inch and a quarter off the tips before soldering them on. Here are the pre-installation photos: Attachment 685556 Attachment 685557 Here is the progress of the work: Attachment 685560 Attachment 685561 Attachment 685562 Attachment 685563 Here are the details of the completed work: Attachment 685564 Attachment 685565 Attachment 685566 Hello, I know your message. My answer is it's old and you may not even have your 535i anymore, but I was wondering where you bought your tips and diffuser back then? or if you have a recommendation where I can get good quality products like you used in 2015. I have a graphite gray 535i that I want to do essentially the same thing with. THANKS! - Chip
|
| darklord1 (564hp) | As stated in the first post, I ordered the tips from cyba (http://www.e90post.com/forums/showthread.php?t=281932). It took about an inch to cut them, but as you can see they worked well. I simply ordered the 550 diffuser from my local dealer. I still have the vehicle and the bits look as good as the day I put them on. Bill
|
| 271189 (275hp) | Quote: Originally posted by Sharbotcom As noted in the first post, I ordered the tips from cyba (http://www.e90post.com/forums/showthread.php?t=281932). It took about an inch to cut them, but as you can see they worked well. I simply ordered the 550 diffuser from my local dealer. I still have the vehicle and the bits look as good as the day I put them on. Bill +1. I have the exact same setup. http://www.bimmerfest.com/forums/sho...81&postcount=1 Although I am thinking of changing the diffuser to that of the 550i M-Performance:
|
| 30051984 (187hp) | Quote: Originally posted by Shawnsheridan +1. Although I am considering replacing the diffuser with the 550i M-Performance: , Attachment 1142859 Attachment 1142858 Shawn: Which module contains the code to change the appearance of the diffuser from normal to M-Performance? Bill
|
| metalcore (706hp) | Quote: Originally posted by Sharbotcom Shawn: Which module contains the code to change the appearance of the diffuser from standard to M-Performance? Bill, it's the DIFF ECU.
|
| Dmedcn23sd (404hp) |
|
| sergio2 (967hp) | I changed my tips to quads today. I ordered the double coat black chrome from cyba and just received the 550 diffuser. I had the work done at Gary's Automotive in Kanata based on a friend's suggestion. I've had a number of other good suggestions (thanks Bobblehead), but this one worked best for me in terms of convenience. John, the installer, was meticulous and everything went well. He cut about an inch and a quarter off the tips before soldering them on. Here are the pre-installation photos: Here is the progress of the work: Here are the photos of the completed work.:
|
| fucku7 (146hp) | Damn Bill, your car is much nicer than mine now. Not fair. I like the look. What's next ?
|
| serg.aleg (872hp) | Quote: Originally posted by bobblehead Damn Bill, Your car looks a lot nicer than mine now. Not fair. I like the look. What's next? JB3 Monday
|
| cyborg (143hp) | it looks good. I want to do the same thing with mine. how much did it cost you?
|
| 600061 (174hp) | Quote: Posted by matt44228 looks good. I want to do the same thing with mine. how much did it cost you? $139 for tips, $128 for the diffuser (I know it's cheaper at other retailers) and $199 for labor.
|
| sexybeast! (959hp) | Quote: Originally posted by Sharbotcom $139 for tips, $128 for diffuser (I know it's cheaper at other retailers), and $199 for labor. looks great next time for you, that's it.
|
| chris1993 (399hp) | Are these slanted and angled tips? or just 2 tips of the same length? 3 days?
|
| 12358 (119hp) | Quote: Originally posted by yxc145 Are they slanted and slanted tips? or just 2 tips of the same length? 3 days? They are offset (inner ones are longer) and angled (cut inward at the bottom). So there is a set of left and right tips. If you look closely at the pictures you will see that the inner tip on both sides protrudes slightly less than the original single tips. The outer tips stick out slightly more although they are slightly shorter due to the curvature of the bumper. Yes, I believe they are 3.
|
| balling (590hp) | From the photos it looks like they just welded them directly to the exhaust pack. Did this change the sound profile? I really like the look and I'm not interested in a sound mod yet. TIA DLM
|
| 08081989 (348hp) | No real sound changes.
|
| 101005 (695hp) | Quote: Posted by Sharbotcom No real sound changes. THANKS. I just ordered a set for my GT. I'll post photos as soon as they arrive and have them installed. FWIW DLM
|
| 221171 (680hp) | Cool
|
| 1598753a (701hp) | I think more people should read this thread and want to ride Quad tricks. This is definitely the most cost effective way to achieve the quad tip look. Well done. It looks awesome.
|
| 130880 (798hp) | Hi, is it possible to do the same for the 535i non-M sport model ? ?!!
|
| travis5 (354hp) | Yes, but you will need to install a bumper from a 550 or do custom work on your existing bumper to enlarge the exhaust opening..
|
| jake18 (590hp) | It looks very clean
|
| 08021980 (488hp) | Quote: Originally posted by Sharbotcom I changed my tips to quads today. I ordered the double coat black chrome from cyba and just received the 550 diffuser. I had the work done at Gary's Automotive in Kanata based on a friend's suggestion. I've had a number of other good suggestions (thanks Bobblehead), but this one worked best for me in terms of convenience. John, the installer, was meticulous and everything went well. He cut about an inch and a quarter off the tips before soldering them on. Here are the pre-installation photos: Attachment 685556 Attachment 685557 Here is the progress of the work: Attachment 685560 Attachment 685561 Attachment 685562 Attachment 685563 Here are the details of the completed work: Attachment 685564 Attachment 685565 Attachment 685566 Hello , I know your message. My answer is it's old and you may not even have your 535i anymore, but I was wondering where you bought your tips and diffuser back then? or if you have a recommendation where I can get good quality products like you used in 2015. I have a graphite gray 535i that I want to do essentially the same thing with. THANKS! - Chip
|
| alasset (740hp) | As stated in the first post, I ordered the tips from cyba (http://www.e90post.com/forums/showthread.php?t=281932). It took about an inch to cut them, but as you can see they worked well. I simply ordered the 550 diffuser from my local dealer. I still have the vehicle and the bits look as good as the day I put them on. Bill
|
| 1champion (833hp) | Quote: Originally posted by Sharbotcom As noted in the first post, I ordered the tips from cyba (http://www.e90post.com/forums/showthread.php?t=281932). It took about an inch to cut them, but as you can see they worked well. I simply ordered the 550 diffuser from my local dealer. I still have the vehicle and the bits look as good as the day I put them on. Bill +1. I have the exact same setup. http://www.bimmerfest.com/forums/sho...81&postcount=1 Although I am thinking of changing the diffuser to that of the 550i M-Performance:
|
| 080898 (225hp) | Quote: Originally posted by Shawnsheridan +1. Although I am considering replacing the diffuser with the 550i M-Performance: , Attachment 1142859 Attachment 1142858 Shawn: Which module contains the code to change the appearance of the diffuser from normal to M-Performance? Bill
|
| kenji (253hp) | Quote: Originally posted by Sharbotcom Shawn: Which module contains the code to change the appearance of the diffuser from standard to M-Performance? Bill, it's the DIFF ECU.
|
| yy (468hp) |
|
| john05 (807hp) | Has anyone with night vision on non-M cars replaced the single slat grille with a double slat grille? Does the night vision mount go directly from a single slat to a double slat (M) without problems? I want to swap my grille on my 650 for dual slats like the M cars but I'm worried about the problem, I know the size of the 5er and 6er are different, just wondering if anyone here with a 5er l 'did?
|
| Njaza (952hp) | Has anyone with night vision on non-M cars replaced the single slat grille with a double slat grille? Does the night vision mount go directly from a single slat to a double slat (M) without problems? I want to swap my grille on my 650 for dual slats like the M cars but I'm worried about the problem, I know the size of the 5er and 6er are different, just wondering if anyone here with a 5er l 'did?
|
| 141312 (412hp) | Hi, sorry for reacting to the old thread, but I am going to do the exact same upgrade using an aftermarket rear diffuser on my 2011 535i M-sport. Does the rear diffuser come off without removing the entire shield -rear shocks? Simply unscrew the 5 bolts at the bottom. Are there clips all around that attach to the bumper? Any recommendations on quad exhaust tips with 2.25 inlet? THANKS
|
| brooklyn71 (581hp) | Quote: Originally posted by vv1981 Hello, sorry to respond to the old thread, but I am going to do the exact same upgrade using an aftermarket rear diffuser on my 2011 535i M-sport. The rear diffuser fits does it detach without removing the entire rear bumper? Simply unscrew the 5 bolts at the bottom. Are there clips all around that attach to the bumper? Any recommendations on quad exhaust tips with 2.25 inlet? thanks The diffuser snaps on and off when the bolts are removed - simple and easy. I recommend the quads from Cyba (to be continued in the first post). You won't regret doing it. Totally transforms the rear appearance of the car. Have fun...
|
| 55555j (458hp) | As Sharbotcom mentioned, but I also think it depends on what type of diffuser you're using? Performance, M5, DTM, 3D? what size advice are you planning to go with?
|
| Gabriel1 (876hp) | Quote: Originally posted by Sharbotcom The diffuser snaps on and off when the bolts are removed - simple and easy. I recommend the quads from Cyba (to be continued in the first post). You won't regret doing it. Totally transforms the rear appearance of the car. Have fun... Thanks, you just made my day with this answer. I'm glad I don't have to take the whole bumper apart. Quote: As Sharbotcom mentioned, but I also think it depends on what type of diffuser you are using? Performance, M5, DTM, 3D? What bit sizes are you considering going with? I'm using this diffuser, but I'll probably have it painted matte black because I don't like the carbon fiber look. the rest of my car is charcoal black. http://www.ebay.ca/itm/172135690731?...%3AMEBIDX%3AIT I will post the before and after photos. As for sizing advice, I'm not sure. Nothing too unpleasant. What do you recommend? Double 3 inches on both sides? thanks guys.
|
| annalise (568hp) | This diffuser will look great! At least 3.5 quad tips. 3 will appear too small. Opt for the offbeat design
|
| carl12 (991hp) | Here is my installation... before and after the Cyba black chrome quads. and this diffuser http://www.ebay.ca/itm/172135690731?...%3AMEBIDX%3AIT very happy with the overall result.
|
| elephant11 (203hp) | It turned out GREAT!
|
| pooh1234 (860hp) | Anyone know where to buy Cyba cheats? All of his threads have been deleted. Is he no longer in business?
|
| death (325hp) | Quote: Posted by j0nblayz Anyone know where to buy cyba cheats? All of his threads have been deleted. Is he no longer active? He logged in only 2 days ago. Have you tried sending him a PM? http://f10.m5post.com/forums/member.php?u=26793
|
| 12string (837hp) | Quote: Posted by vv1981 Here is my installation....before and after the Cyba black chrome quads. and this broadcaster http://www.ebay.ca/itm/172135690731?...%3AMEBIDX%3AIT very happy with the overall result. It looks awesome. I'm thinking of doing the same configuration. I just messaged Cyba for a price on tipping. How big is yours? Do you think you can go further without problems?
|
| multik (882hp) | Sorry to bring up a very old topic. Has anyone else done this process? Just wanted to confirm that the input is 2.25 and I can get 3 or 3.5 out.?
|
| just516in (145hp) | Quote: Posted by Ickdeep Sorry to revive a very old thread. Has anyone else done this process? I just wanted to confirm that the input is 2.25 and can I get 3 or 3.5 on the output? All Cyba Quad Tips are as follows Inlet - 57mm (2.25) Outlet - 76mm (3.00) Length - 205mm (8.00)
|
| diosmio (615hp) | Quote: Originally Posted by Shawnsheridan All Cyba Quad Bits are as follows Inlet - 57mm (2.25) Outlet - 76mm (3.00) Length - 205mm (8.00) How did it go your installation process and the result? I just ordered an m5 diffuser which arrived today.
|
| irock2 (588hp) | Quote: Originally posted by Ickdeep How was your installation process and its results? I just ordered an m5 diffuser which arrived today. GOOD. See here: http://www.bimmerfest.com/forums/sho...d.php?t=700328 I don't have them anymore. I now use a Remus Catback quad exhaust.
|
| 080896 (215hp) | Quote: Originally posted by Shawnsheridan Good. See here: http://www.bimmerfest.com/forums/sho...d.php?t=700328 I don't have them anymore. I now use a Remus Catback quad exhaust. Good!
|
| lopez2 (354hp) | I just ordered the 550msport rear diffuser, but does anyone know if I can use a dual 3.5 offset, tips with the diffuser 550.
|
| Marathon Man (298hp) | have you already had an answer to your question? I also have the 550m sport bumper and am wondering if I can also use a plug 3,5....
|
| gracie4 (845hp) | Hi, sorry for reacting to the old thread, but I am going to do the exact same upgrade using an aftermarket rear diffuser on my 2011 535i M-sport. Does the rear diffuser come off without removing the entire shield -rear shocks? Simply unscrew the 5 bolts at the bottom. Are there clips all around that attach to the bumper? Any recommendations on quad exhaust tips with 2.25 inlet? THANKS
|
| hertha (570hp) | Quote: Originally posted by vv1981 Hello, sorry to respond to the old thread, but I am going to do the exact same upgrade using an aftermarket rear diffuser on my 2011 535i M-sport. The rear diffuser fits does it detach without removing the entire rear bumper? Simply unscrew the 5 bolts at the bottom. Are there clips all around that attach to the bumper? Any recommendations on quad exhaust tips with 2.25 inlet? thanks The diffuser snaps on and off when the bolts are removed - simple and easy. I recommend the quads from Cyba (to be continued in the first post). You won't regret doing it. Totally transforms the rear appearance of the car. Have fun...
|
| yura (904hp) | As Sharbotcom mentioned, but I also think it depends on what type of diffuser you're using? Performance, M5, DTM, 3D? what size advice are you planning to go with?
|
| snoopy9 (533hp) | Quote: Originally posted by Sharbotcom The diffuser snaps on and off when the bolts are removed - simple and easy. I recommend the quads from Cyba (to be continued in the first post). You won't regret doing it. Totally transforms the rear appearance of the car. Have fun... Thanks, you just made my day with this answer. I'm glad I don't have to take the whole bumper apart. Quote: As Sharbotcom mentioned, but I also think it depends on what type of diffuser you are using? Performance, M5, DTM, 3D? What bit sizes are you considering going with? I'm using this diffuser, but I'll probably have it painted matte black because I don't like the carbon fiber look. the rest of my car is charcoal black. http://www.ebay.ca/itm/172135690731?...%3AMEBIDX%3AIT I will post the before and after photos. As for sizing advice, I'm not sure. Nothing too unpleasant. What do you recommend? Double 3 inches on both sides? thanks guys.
|
| www12345 (843hp) | This diffuser will look great! At least 3.5 quad tips. 3 will appear too small. Opt for the offbeat design
|
| saratov (441hp) | Here is my installation... before and after the Cyba black chrome quads. and this diffuser http://www.ebay.ca/itm/172135690731?...%3AMEBIDX%3AIT very happy with the overall result.
|
| oriflame_1910 (220hp) | It turned out GREAT!
|
| multipass (434hp) | Anyone know where to buy Cyba cheats? All of his threads have been deleted. Is he no longer in business?
|
| otioti (436hp) | Quote: Posted by j0nblayz Anyone know where to buy cyba cheats? All of his threads have been deleted. Is he no longer active? He logged in only 2 days ago. Have you tried sending him a PM? http://f10.m5post.com/forums/member.php?u=26793
|
| Cosmo335i (678hp) | Quote: Posted by vv1981 Here is my installation....before and after the Cyba black chrome quads. and this broadcaster http://www.ebay.ca/itm/172135690731?...%3AMEBIDX%3AIT very happy with the overall result. It looks awesome. I'm thinking of doing the same configuration. I just messaged Cyba for a price on tipping. How big is yours? Do you think you can go further without problems?
|
| Philipp (280hp) | Sorry to bring up a very old topic. Has anyone else done this process? Just wanted to confirm that the input is 2.25 and I can get 3 or 3.5 out.?
|
| PATSIMINI (956hp) | Quote: Posted by Ickdeep Sorry to revive a very old thread. Has anyone else done this process? I just wanted to confirm that the input is 2.25 and can I get 3 or 3.5 on the output? All Cyba Quad Tips are as follows Inlet - 57mm (2.25) Outlet - 76mm (3.00) Length - 205mm (8.00)
|
| tiffany01 (629hp) | Quote: Originally posted by Shawnsheridan All Cyba Quad Bits are as follows Inlet - 57mm (2.25) Outlet - 76mm (3.00) Length - 205mm (8.00) How did it go your installation process and the result? I just ordered an m5 diffuser which arrived today.
|
| savemoney (661hp) | Quote: Originally posted by Ickdeep How was your installation process and its results? I just ordered an m5 diffuser which arrived today. GOOD. See here: http://www.bimmerfest.com/forums/sho...d.php?t=700328 I don't have them anymore. I now use a Remus Catback quad exhaust.
|
| romantic1 (357hp) | Quote: Originally posted by Shawnsheridan Good. See here: http://www.bimmerfest.com/forums/sho...d.php?t=700328 I don't have them anymore. I now use a Remus Catback quad exhaust. Good!
|
| yuriy (452hp) | I just ordered the 550msport rear diffuser, but does anyone know if I can use a dual 3.5 offset, tips with the diffuser 550.
|
| smokey09 (621hp) | have you already had an answer to your question? I also have the 550m sport bumper and am wondering if I can also use a plug 3,5....
|
| 230196 (355hp) | Has anyone installed the BMW Performance exhaust tips on the F10 535 factory exhaust? Does it fit correctly? https://www.ecstuning.com/b-genuine-...SABEgJBFvD_BwE
|
| melvin2 (122hp) | I can't speak to these specifically, but on the M Perf exhaust they attach to a single wall, unfinished pipe. You may have to cut your factory ones, I imagine they are double walled. But my car already had the MPE so I'm really no help
|
| Mahzari (612hp) | LOL, here is a photo of my original 535i exhaust, but the tips, as you can see, are welded. I'm not sure how the M Performance tip would be installed? A muffler shop should probably cut off the old tips...extend the pipe enough to fit inside the M Performance tip and solder.?
|
| emerald (624hp) | M performance tips are not welded. They are installed using a small screw. As Isturbointeg stated, the old ones need to be cut out, extend the tips and install the new tips. Honestly, it would just be easier to install the whole M Performance system at this point, with all the work that entails. Still to this day, the best mod on my car. I LOVE the sound.
|
| titten (629hp) | My friends 535i M sport has black exhaust tips that are bolted on, OEM BMW black tips from the factory. It is interesting to note that on some cars the tips come off and others do not...
|
| 170984 (746hp) | Quote: Originally posted by 5soko My friends 535i M sport has black exhaust tips that are bolted on, BMW OEM black tips from the factory. It's interesting to note that on some cars the tips come off and others don't. Yeah! upon closer inspection, these tips cannot be removed. If you're just looking for pure aesthetics, why not buy some nice chrome bits on eBay?
|
| havana1 (970hp) | Has anyone installed the BMW Performance exhaust tips on the F10 535 factory exhaust? Does it fit correctly? https://www.ecstuning.com/b-genuine-...SABEgJBFvD_BwE
|
| AggieTailg8r (424hp) | I can't speak to these specifically, but on the M Perf exhaust they attach to a single wall, unfinished pipe. You may have to cut your factory ones, I imagine they are double walled. But my car already had the MPE so I'm really no help
|
| 1234QWER (472hp) | LOL, here is a photo of my original 535i exhaust, but the tips, as you can see, are welded. I'm not sure how the M Performance tip would be installed? A muffler shop should probably cut off the old tips...extend the pipe enough to fit inside the M Performance tip and solder.?
|
| time2fly (443hp) | M performance tips are not welded. They are installed using a small screw. As Isturbointeg stated, the old ones need to be cut out, extend the tips and install the new tips. Honestly, it would just be easier to install the whole M Performance system at this point, with all the work that entails. Still to this day, the best mod on my car. I LOVE the sound.
|
| king360 (238hp) | My friends 535i M sport has black exhaust tips that are bolted on, OEM BMW black tips from the factory. It is interesting to note that on some cars the tips come off and others do not...
|
| nealjacobs (179hp) | Quote: Originally posted by 5soko My friends 535i M sport has black exhaust tips that are bolted on, BMW OEM black tips from the factory. It's interesting to note that on some cars the tips come off and others don't. Yeah! upon closer inspection, these tips cannot be removed. If you're just looking for pure aesthetics, why not buy some nice chrome bits on eBay?
|
| www222 (164hp) | I don't know if there is a suitable place to post this. If so, my apologies and please tell me where I should post. There are 16 months left on a mint condition 550i X-Drive. Lease expires 08/03/19 Carbon Black Mocha Metallic Nappa Leather This car is in perfect condition. Always parked. Never driven in the snow. ONLY 8,700 MILES!!! I only have 8,700 miles on this car. I leased it for 12,000 miles a year. This will give you over 1,600 miles per month! Great bonus. The car is loaded with: M Sport Package Cold Weather Driver Assistance Package Executive Package Lighting Package (LED Headlights) Black Grille Stainless Steel Pedals VIN# WBAKP9C53GG587633 MSRP at $80,855 Assumption of monthly payment of $776.65. I'll even pay $500 worth of lease assumption documents to BMW Financial as an incentive.
|
| coffee2 (504hp) | I don't know if there is a suitable place to post this. If so, my apologies and please tell me where I should post. There are 16 months left on a mint condition 550i X-Drive. Lease expires 08/03/19 Carbon Black Mocha Metallic Nappa Leather This car is in perfect condition. Always parked. Never driven in the snow. ONLY 8,700 MILES!!! I only have 8,700 miles on this car. I leased it for 12,000 miles a year. This will give you over 1,600 miles per month! Great bonus. The car is loaded with: M Sport Package Cold Weather Driver Assistance Package Executive Package Lighting Package (LED Headlights) Black Grille Stainless Steel Pedals VIN# WBAKP9C53GG587633 MSRP at $80,855 Assumption of monthly payment of $776.65. I'll even pay $500 worth of lease assumption documents to BMW Financial as an incentive.
|
| google9 (43hp) | I want to go further with some flares, but I'm not looking to break the bank. I had a wide body 370z before my 550i and I feel like it needs flares. What universal models can you recommend? You don't mind if they're fiberglass or not, but I'm not looking to spend $11,000 on a kit lol
|
| icecream123 (181hp) | for the front some guys will upgrade to the M5 fenders as they stick out a bit. if you are looking for a flare kit to put on OEM fenders there is one but it is MUGLY! fromwrxto330ci had custom rear flares made on his. I don't know what it cost him. Hamman $15,000 https://www.ebay.com/itm/BMW-F10-M5-...JYHkHi&vxp=mtr Prior Design $12,000 https://www.ebay.com/itm/Prior-Desig.. .wAAOSwg9dZwACC
|
| 22041991 (947hp) | http://f10.5post.com/forums/showthre...355569&page=22 message 470
|
| 159753258456 (389hp) | I want to go further with some flares, but I'm not looking to break the bank. I had a wide body 370z before my 550i and I feel like it needs flares. What universal models can you recommend? You don't mind if they're fiberglass or not, but I'm not looking to spend $11,000 on a kit lol
|
| jason21 (897hp) | for the front some guys will upgrade to the M5 fenders as they stick out a bit. if you are looking for a flare kit to put on OEM fenders there is one but it is MUGLY! fromwrxto330ci had custom rear flares made on his. I don't know what it cost him. Hamman $15,000 https://www.ebay.com/itm/BMW-F10-M5-...JYHkHi&vxp=mtr Prior Design $12,000 https://www.ebay.com/itm/Prior-Desig.. .wAAOSwg9dZwACC
|
| cacti (262hp) | http://f10.5post.com/forums/showthre...355569&page=22 message 470
|
| 0201 (528hp) | Agency Power's paddle shifters are a must for any vehicle with flip-up paddles on the steering wheel! Why, because stock is boring and you need to have better control of your shifts no matter where your hands are. The manual transmission is slowly disappearing and in its place are Formula 1-inspired dual-clutch gearboxes that shift faster than you'd think. For the most part, you put it in Drive mode and just let the car handle the gear changes. But for those who want to shift gears, the vehicle's manual mode is where it's at. Hitting the paddles up and down to change gears feels exhilarating. But not all drivers go straight or have their hands on 9 and 3 o'clock. For those who master the track and its vicious turns, you need to be able to grab a gear at any time. Agency Power Paddle Shifter Extensions make this a reality. Designed for easy installation as an add-on part to your factory unit, extensions typically add 1-2 inches to the top and bottom of the factory steering wheel shifter. They attach with supplied double-sided tape or some use a small set screw for a secure fit. Designed from machined aluminum or cast aluminum, each left and right shift paddle is designed to be ergonomically correct to enhance your driving experience. Agency Power has not only created a functional product, but also taken individuality to the aftermarket world by offering our paddles in different colors. The paddles are done in a unique Cerakote finish that is durable like powder coating, but soft and won't fade like anodizing. Each paddle features a laser-etched AP logo and a distinct – and sign. If you're looking to improve your grip and shifting, then the Agency Power Paddle Shifter Extension is ready for your vehicle! Compatibility: BMW 2 Series F22 – 220I, 228I, 240I, M235I BMW 3 Series E90/E92 with MSport steering wheel 328I, 335I BMW 3 Series F30/31 – 320I, 328I, 330I, 335I, 340I BMW 4 Series F32 – 420I, 428I, 435I BMW 5 Series F10 – 528I, 535I, 550I BMW 6 Series F12 – 640I, 650I BMW X3 Series F25 BMW X5 Series F15 BMW X6 Series F16 Others that share the same shift paddles
|
| fuck09 (183hp) | Price??? Colors???
|
| borderm3 (703hp) | Found them here for $175 https://www.x-ph.com/agency-power-pa...es-non-m-cars/ Debate to get them for $35 https://www.ebay .com/itm /Direction-Wh....c100011.m1850
|
| faustino (309hp) | I've already bought them and they fit me terribly. They move too far from the steering wheel. AP simply puts its logo on the same item and passes it on.
|
| paulina123 (41hp) | It's definitely for those who have the modding fever. If you hold the steering wheel as you should, the normal shift paddles are more than adequate in terms of functionality.
|
| kleenex1 (480hp) | That’s looooong shift paddles! do you guys have long fucking fingers??
|
| jbeene (804hp) | It looks amazing
|
| aaddam2 (60hp) | Blaahahaha...it's $29.99 on Amazon, made in China, I feel sorry for whoever already paid that much money for it...hahaha
|
| 260381 (568hp) | Shouldn't they be listed in the classifieds section (the commercial version)? Same comment about this publication on the X forum5
|
| aa11bb22 (622hp) | Agency Power's paddle shifters are a must for any vehicle with flip-up paddles on the steering wheel! Why, because stock is boring and you need to have better control of your shifts no matter where your hands are. The manual transmission is slowly disappearing and in its place are Formula 1-inspired dual-clutch gearboxes that shift faster than you'd think. For the most part, you put it in Drive mode and just let the car handle the gear changes. But for those who want to shift gears, the vehicle's manual mode is where it's at. Hitting the paddles up and down to change gears feels exhilarating. But not all drivers go straight or have their hands on 9 and 3 o'clock. For those who master the track and its vicious turns, you need to be able to grab a gear at any time. Agency Power Paddle Shifter Extensions make this a reality. Designed for easy installation as an add-on part to your factory unit, extensions typically add 1-2 inches to the top and bottom of the factory steering wheel shifter. They attach with supplied double-sided tape or some use a small set screw for a secure fit. Designed from machined aluminum or cast aluminum, each left and right shift paddle is designed to be ergonomically correct to enhance your driving experience. Agency Power has not only created a functional product, but also taken individuality to the aftermarket world by offering our paddles in different colors. The paddles are done in a unique Cerakote finish that is durable like powder coating, but soft and won't fade like anodizing. Each paddle features a laser-etched AP logo and a distinct – and sign. If you're looking to improve your grip and shifting, then the Agency Power Paddle Shifter Extension is ready for your vehicle! Compatibility: BMW 2 Series F22 – 220I, 228I, 240I, M235I BMW 3 Series E90/E92 with MSport steering wheel 328I, 335I BMW 3 Series F30/31 – 320I, 328I, 330I, 335I, 340I BMW 4 Series F32 – 420I, 428I , 435I BMW 5 Series F10 – 528I, 535I, 550I BMW 6 Series F12 – 640I, 650I BMW X3 Series F25 BMW X5 Series F15 BMW X6 Series F16 Others that share the same shift paddles
|
| jedimaster (447hp) | Price??? Colors???
|
| 150785 (755hp) | Found them here for $175 https://www.x-ph.com/agency-power-pa...es-non-m-cars/ Debate to get them for $35 https://www.ebay .com/itm /Direction-Wh....c100011.m1850
|
| beaner2 (384hp) | I've already bought them and they fit me terribly. They move too far from the steering wheel. AP simply puts its logo on the same item and passes it on.
|
| gundamwing (657hp) | It's definitely for those who have the modding fever. If you hold the steering wheel as you should, the normal shift paddles are more than adequate in terms of functionality.
|
| 20081993 (694hp) | That’s looooong shift paddles! do you guys have long fucking fingers??
|
| 28041986 (133hp) | It looks amazing
|
| Dkflbvbh (856hp) | Blaahahaha...it's $29.99 on Amazon, made in China, I feel sorry for whoever already paid that much money for it...hahaha
|
| polita (423hp) | Shouldn't they be listed in the classifieds section (the commercial version)? Same comment about this publication on the X forum5
|
| 310379 (430hp) | Hello, new comer here. I was looking around my son's trunk and noticed the top area was bare and had no liner. Is this normal, what is this area called? Which part should I order?
|
| torrente (97hp) | Quote: Posted by Johngm45 Hello, newbie here. I was looking around my son's trunk and noticed the top area was bare and had no liner. Is this normal, what is this area called? What part should I order? Is your son's car an F10? Assuming you're talking about bare metal... Are you talking about the trunk lid? - There should be a lining inside. Are you talking about the ceiling inside the trunk, therefore the underside of the rear shelf? - There is no lining.
|
| StewtheBassman (314hp) | Quote: Posted by mrashton Quote: Posted by Johngm45 Hello, newbie here. I was looking around my son's trunk and noticed the top area was bare and had no liner. Is this normal, what is this area called? What part should I order? Is your son's car an F10? Assuming you're talking about bare metal... Are you talking about the trunk lid? - There should be a lining inside. Are you talking about the ceiling inside the trunk, therefore the underside of the rear shelf? - There is no lining. Am I talking about the battery or where the literal top is?^Top of were you inside or top near the seats?
|
| wiener (62hp) | Show us a photo
|
| cordero1 (695hp) | Quote: Posted by mrashton Is your son's car an F10? Assuming you're talking about bare metal... Are you talking about the trunk lid? - There should be a lining inside. Are you talking about the ceiling inside the trunk, therefore the underside of the rear shelf? - There is no lining. As far as I know it's a sport 14 535xi m and yes bare metal you can see the white paint. As if a sign should be there. I wish the forums were open so I could add photos
|
| tygferrfddss (467hp) | No, the rear deck doesn't have anything covering it, it's bare metal there..
|
| 05081992 (281hp) | Quote: Originally posted by G-Bus No, the rear deck doesn't have anything covering it, it's bare metal there. THANKS
|
| sssssssss (443hp) | Hello, new comer here. I was looking around my son's trunk and noticed the top area was bare and had no liner. Is this normal, what is this area called? Which part should I order?
|
| pinocho (2hp) | Quote: Posted by Johngm45 Hello, newbie here. I was looking around my son's trunk and noticed the top area was bare and had no liner. Is this normal, what is this area called? What part should I order? Is your son's car an F10? Assuming you're talking about bare metal... Are you talking about the trunk lid? - There should be a lining inside. Are you talking about the ceiling inside the trunk, therefore the underside of the rear shelf? - There is no lining.
|
| pele (664hp) | Quote: Posted by mrashton Quote: Posted by Johngm45 Hello, newbie here. I was looking around my son's trunk and noticed the top area was bare and had no liner. Is this normal, what is this area called? What part should I order? Is your son's car an F10? Assuming you're talking about bare metal... Are you talking about the trunk lid? - There should be a lining inside. Are you talking about the ceiling inside the trunk, therefore the underside of the rear shelf? - There is no lining. Am I talking about the battery or where the literal top is?^Top of were you inside or up near the seats?
|
| freedom21 (948hp) | Show us a photo
|
| silver! (293hp) | Quote: Posted by mrashton Is your son's car an F10? Assuming you're talking about bare metal... Are you talking about the trunk lid? - There should be a lining inside. Are you talking about the ceiling inside the trunk, therefore the underside of the rear shelf? - There is no lining. As far as I know it's a sport 14 535xi m and yes bare metal you can see the white paint. As if a sign should be there. I wish the forums were open so I could add photos
|
| skate08 (381hp) | No, the rear deck doesn't have anything covering it, it's bare metal there..
|
| jimmy3 (601hp) | Quote: Originally posted by G-Bus No, the rear deck doesn't have anything covering it, it's bare metal there. THANKS
|
| enterme (420hp) | I wanted to get some feedback from BMW owners, if anyone has ever gone through a claim and after sales warranty process? I purchased a 5 year 80,000 mile warranty when I purchased my 2011 535 with 75,000 miles. Nothing has gone wrong and we mainly use the car around town but I'm waiting for the engine to have problems. I have an AlphaOne Premier warranty. Any feedback would be great. THANKS!
|
| british1 (450hp) | Every warranty company is different. The devil is in the details. Read your contract and anything they exclude will be there. Some companies are a little sneaky in the way they exclude expensive items. Reading and rereading is the best advice.
.
|
All times are GMT -5. The time now is 01:58 AM.
